Skip to content
Doefin
Doefin Learn / Tutorial

Learn / Tutorial

Estimate your fleet’s difficulty exposure.

Load a sample fleet, compare expected BTC production and see what the result can and cannot tell you.

Open the worked example →4 steps · No account required · 17 September 2026

The outcome

Estimate the change in expected BTC production from a difficulty change, at the same hashrate, over a fixed time window.

Before you start

  • Your fleet hashrate in EH/s (1 EH/s = 1,000,000 TH/s).
  • A starting difficulty and two scenarios to compare.
  • An average fee assumption and a time window. No wallet is needed.
  1. 1

    Load the sample.

    Open the worked example. It uses 1 EH/s, starting difficulty of 127.48T, average fees of 0.05 BTC per block and one epoch of target time (about two weeks). These are illustrative inputs, not current network data.

    Expected outcome: Hashrate reads 1.00 EH/s and the window reads one epoch.

  2. 2

    Change one variable: difficulty.

    Set the easier case to 0% and the harder case to +10%. Leave hashrate, fees and time unchanged. You can then see the effect of difficulty without changing several assumptions at once.

    Annotated calculator example

    Inputs

    AHashrate

    1.00 EH/s

    BDifficulty increase

    +10.0%

    CProduction difference

    0.638 BTC

    At starting difficulty
    7.014 BTC
    At 10% higher difficulty
    6.377 BTC
    A fixes fleet size. B changes difficulty only. C is the difference in production, not a payout. One epoch of target time; 127.48T starting difficulty; 0.05 BTC fees per block. Sample prepared 17 September 2026.

    Expected outcome: The easier case matches “No change”; the harder case shows less expected BTC production.

  3. 3

    Read production before the dollar value.

    Compare production at starting difficulty with production after the 10% increase. The USD figure multiplies the BTC difference by the price input; it is not a second source of loss.

    Check the arithmetic

    Production after change = baseline production ÷ 1.10

    A 10% difficulty increase means about 9.09% less expected BTC production in this fixed-duration model, at the same hashrate and all else equal.

    Expected outcome: Production falls from 7.014 BTC to 6.377 BTC, a difference of 0.638 BTC.

  4. 4

    Replace the sample with your own inputs.

    Enter your hashrate and assumptions. Read the model limits, then review how a difficulty contract settles. A production difference changes continuously; a binary contract has a threshold and a fixed payout.

    Expected outcome: You can explain the production range and why it is different from a contract payout.

What this exercise leaves out

Uptime, pool fees, changing transaction fees and changes in your fleet are not modelled here. The sample assumes a constant 3.125 BTC subsidy and a fixed time window. The calculator does not forecast difficulty or determine a position size.

Keep learning

Distinguish production from settlement

Read how a threshold-based payout differs from a continuously changing production estimate.

Try with your numbers

Calculate your own exposure

Replace the worked example with your fleet and assumptions.